-40%

0-200KHz Oscilloscope 1024 Bytes 12 Bits 2.4in TFT Acrylic Case DSO138

$ 17.93

Availability: 30 in stock
  • Type: Welded
  • All returns accepted: Returns Accepted
  • Precision: 12 bits
  • Oscilloscope Type: Digital Oscilloscope
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Brand: Unbranded
  • Maximum Real-Time Sampling Rate: 1Msps
  • Restocking Fee: No
  • Model: DSO138
  • Return shipping will be paid by: Buyer
  • Package Contents: Oscilloscopekit
  • Sampling buffer depth: 1024 bytes
  • Coupling mode: DC/AC/GND
  • Condition: New
  • Refund will be given as: Money Back

    Description

    Product Description
    0-200KHz Oscilloscope 1024 Bytes 12 Bits 2.4in TFT Acrylic Case DSO138
    Features:
    100% brand new and high quality
    Made of high-quality materials, durable
    The kit uses the ARM Cortex-M3 processor (STM32F103C8), including a 2.4-inch color TFT display, which can be used as an ARM test development board.
    Secondary development can be carried out on the basis of this kit, for example, it can be changed to millivoltmeter, data logger, etc.
    The vertical displacement is adjustable with instructions.
    With automatic, regular and one-off modes, it is easy to capture instantaneous waveforms.
    It can be triggered by rising or falling edge.
    Observable previous trigger waveform (negative delay).
    The waveform display can be frozen at any time (HOLD function).
    Comes with 1Hz/3.3V square wave test signal source.
    With digital display of waveform parameters, including frequency, period, pulse width, duty cycle, MAX./MIN./AVG./Peak-Peak/virtual value.
    Waveform storage function: the waveform will not be lost after power off.
    Short circuit and open circuit detection: can help users find welding errors.
    TFT controller identification function.
    Product parameters:
    Model: DSO138
    Type: Welded
    Maximum real-time sampling rate: 1Msps
    Precision: 12 bits
    Sampling buffer depth: 1024 bytes
    Analog bandwidth: 0-200KHz
    Vertical sensitivity: 10 mV/Div-5V/Div (1-2-5 progressive method)
    Input impedance: 1MΩ
    Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
    Coupling mode: DC/AC/GND
    Horizontal time base range: 10mus/Div-50s/Div (1-2-5 progressive method)
    Power supply voltage: DC 9V
    PCB size: 117 * 76mm / 4.6 * 3in
    Screen size: 52 * 40mm / 2 * 1.57in
    Packing size: 18*12.5*3cm/7.08*4.92*1.18in
    Package list:
    1 *DSO138 2.4" TFT Welded Fully Welded Pocket Digital Oscilloscope
    1 *Acrylic DIY shell (need to assemble)
    1 *Probe
    1 *User Manual (English)
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
    Payment
    We accept payment via Paypal only.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    Delivery details
    We only
    ship to confirmed Paypal addresses.
    Please comfirm that your paypal address is in line with your shipping address.
    Please kindly note that
    the c
    ombined shipping
    is not provided
    because the shipping fee is calculated by weight. Also, the each additional item means
    exactly
    the the same color and size.
    It takes about
    7
    -15 working days to US; about 10-30 working days to other countries.
    Transit time may be a little delayed because of the
    bad
    weather and customs
    inspection
    . If you
    do
    not receive your
    item
    within 30 working days since payment finished, please contact us immediately for further assistance.
    Contact us
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
    p
    lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
    working hours.