DS213 Mini 4 Channel Nano V2 Quad Digital Oscilloscope ARM Portable

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DS213 Mini 4 Channel Nano V2 Quad Digital Oscilloscope ARM Portable Pocket Size
Popular
Popular
Product Introduction
Description :
- DS213 is a "5-track, 4-wave line" digital storage oscilloscope for general-purpose electronic engineering task and it is based on ARM Cortex M3 core. DS213 uses FPGA to manage external ADC’s control and data cache mode. It provides 4 application partitions for loading and upgrading up to 4 different application firmware. It also has built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware according to their needs
Feature :
- Mini size, light weight, portable and handheld;
- It can store waveforms, making waveform analysis clearer and more effective;
- Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger;
- Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width.
Specification :
- CPU: ARM Cortex M3
- FIFO & Control: FPGA
- ADC: HWD9288-100
- Analog Channels: 2 [CH_A] [CH_B]
- Digital Channels: 2 [CH_C] [CH_D]
- Operation Channel: INV [CH_A], INV [CH_B], [CH_A]+[CH_B]、 [CH_A]-[CH_B]、[CH_C]&[CH_D]、[CH_C] | [CH_D]
- Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe)
100mV-100V/div (1-2-5 STEP) (using X10 probe)
- Vertical Resolution: 8 bits
- Sample Memory Depth: 4 channels, 4*4K
- Coupling: DC, AC
- Max Input Voltage: ±40Vpp (using X1 probe)
±400Vpp (using X10 probe)
- Trigger Types: Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger
- Trigger Mode: Auto, Normal, Single, Slow
- Trigger Source: [CH_A] [CH_B] [CH_C] [CH_D]
- Signal Source: Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources;
- Sine/Triangle/Sawtooth Wave: 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources
- Storage: built in 8M USB disk
- File Types: BMP, BUF, CSV
- Auto Measurement Types: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average
- Cursor Measurement: Time value, Amplitude value
- Display Modes: 4 wave lines: Line 1: [CH_A], HIDE
Line 2: [CH_B], HIDE
Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
Line 4: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE
- Sampling Mode: Real-time Sampling
- Sampling Rate: 100M Sa/s
- Battery: 1000mAh
- Size: 99.5mmx58.5mmx13.5mm
- Weight: 129g (with battery)
Certificate: CE, FCC
Package included :
- 1 x DS213 Digital Oscilloscope
- 1 x X10 Probe
- 1 x X1 Probe
- 1 x USB Cable
- 1 x Screw driver
- 1 x Cover Bag
- 1 x User Manual
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DS213 Mini 4 Channel Nano V2 Quad Digital Oscilloscope ARM Portable Pocket Size
Product Introduction
Description :
- DS213 is a "5-track, 4-wave line" digital storage oscilloscope for general-purpose electronic engineering task and it is based on ARM Cortex M3 core. DS213 uses FPGA to manage external ADC’s control and data cache mode. It provides 4 application partitions for loading and upgrading up to 4 different application firmware. It also has built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware according to their needs
Feature :
- Mini size, light weight, portable and handheld;
- It can store waveforms, making waveform analysis clearer and more effective;
- Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger;
- Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width.
Specification :
- CPU: ARM Cortex M3
- FIFO & Control: FPGA
- ADC: HWD9288-100
- Analog Channels: 2 [CH_A] [CH_B]
- Digital Channels: 2 [CH_C] [CH_D]
- Operation Channel: INV [CH_A], INV [CH_B], [CH_A]+[CH_B]、 [CH_A]-[CH_B]、[CH_C]&[CH_D]、[CH_C] | [CH_D]
- Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe)
100mV-100V/div (1-2-5 STEP) (using X10 probe)
- Vertical Resolution: 8 bits
- Sample Memory Depth: 4 channels, 4*4K
- Coupling: DC, AC
- Max Input Voltage: ±40Vpp (using X1 probe)
±400Vpp (using X10 probe)
- Trigger Types: Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger
- Trigger Mode: Auto, Normal, Single, Slow
- Trigger Source: [CH_A] [CH_B] [CH_C] [CH_D]
- Signal Source: Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources;
- Sine/Triangle/Sawtooth Wave: 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources
- Storage: built in 8M USB disk
- File Types: BMP, BUF, CSV
- Auto Measurement Types: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average
- Cursor Measurement: Time value, Amplitude value
- Display Modes: 4 wave lines: Line 1: [CH_A], HIDE
Line 2: [CH_B], HIDE
Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
Line 4: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE
- Sampling Mode: Real-time Sampling
- Sampling Rate: 100M Sa/s
- Battery: 1000mAh
- Size: 99.5mmx58.5mmx13.5mm
- Weight: 129g (with battery)
Certificate: CE, FCC
Package included :
- 1 x DS213 Digital Oscilloscope
- 1 x X10 Probe
- 1 x X1 Probe
- 1 x USB Cable
- 1 x Screw driver
- 1 x Cover Bag
- 1 x User Manual
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.