-40%
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts

DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts

$ 13.72

Availability: 14 in stock
  • Refund will be given as: Money Back
  • Record Length: 1024 points
  • Material: PCB
  • MPN: Does Not Apply
  • Current Consumption: ~120mA @ 5V
  • Input Impedance: 1M ohms/20pF
  • Sensitivity Range: 10mV/Div - 5V/Div
  • All returns accepted: Returns Accepted
  • Main Board Size: Approx. 70 * 53mm / 2.76 * 2.1in
  • Brand: Unbranded
  • Time Base Range: 10us/Div - 500s/Div
  • Coupling Modes: DC / AC / GND
  • Trigger Position: Center of Buffer
  • Analog Bandwidth: 0-200KHz
  • Maximum Input Voltage: 50Vpk (1X probe)
  • Resolution: 12 bits
  • Item must be returned within: 30 Days
  • Number of Channel: 1
  • Type: DSO138 Digital Oscilloscope
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Supply Voltage: DC 3.5V - 5V
  • Analog Board Size: Approx. 81 * 70mm / 3.19 * 2.76in
  • Maximum Real-Time Sampling Rate: 1MSa/s

    Description

    DSO138 Mini Digital Oscilloscope Electronic Learning Training DIY Parts
    Specifications:
    Condition: Brand New
    Material: PCB
    Number of Channel: 1
    Analog Bandwidth: 0-200KHz
    Sensitivity Range: 10mV/Div - 5V/Div
    Sensitivity Error: <5%
    Maximum Input Voltage: 50Vpk (1X probe)
    Input Impedance: 1M ohms/20pF
    Resolution: 12 bits
    Record Length: 1024 points
    Coupling Modes: DC / AC / GND
    Maximum Real-time Sampling Rate: 1MSa/s
    Time Base Range: 10us/Div - 500s/Div
    Trigger Modes: Auto, Normal, and Single
    Trigger Position: Center of Buffer
    Display: 2.4" Color TFT LCD with 320*240 Resolution
    Supply Voltage: DC 3.5V - 5V
    Current Consumption: ~120mA @ 5V
    Main Board Size: Approx. 70 * 53mm / 2.76 * 2.1in
    Analog Board Size: Approx. 81 * 70mm / 3.19 * 2.76in
    Features:
    2.4-inch color TFT LCD with 320*240 resolution displays parameters clearly.
    Make MCU and LCD stay in one PCB to avoid problematic pin-header connections.
    Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.
    Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.
    Can be connected with computer for data transmission.
    DSO138mini has improvements in firmware, too.
    Its trigger can work reliably under 10us and 20us timebase settings.
    With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
    Available rising or falling edge trigger.
    Observable previous trigger waveform (negative delay).
    Can freeze at any time waveform display (HOLD function).
    Waveform storage function: will not lose the waveform after power off.
    Short-circuit and open-circuit detection: can help the user find out the soldering error.
    TFT controller recognition function.
    All SMD parts has been soldered and the MCU has been programmed.
    Comes with a transparent case, can protect the oscilloscope well.
    Note:
    The SMD parts in this DIY kit has been soldered, you just need to solder other parts by yourself.
    Package Included:
    1set x DSO138mini DIY Kit
    1pc x Transparent Case
    1pc x User Manual (English)